Updating bios on acer aspire one
Again, I am NOT a PC or laptop tech and this is purely anecdotal but for whatever reason this has worked very well for me. It was on and working one minute and then when I went to use it the screen was black like it was sleeping and the. press "FN" "ESC", keep it pressed; press "Power ON", when the power light appear, release "FN" "ESC" Power LED will blink for 1/2 min. after that: turn it off, pull out USB-Stick; Power ON... Here are some details of my problem: After the Acer logo, only the black screen is showing.
I don't want to discredit other suggestions such as checking your drivers and updating them but in my case none of that was the issue. I can also move the cursor but nothing else is working.
Solution 2: As stated above I do believe this has to do with the connection between the mother board and physical screen. Download the Bios Recovery fille and Extract the exe file then put it on an USB-stick.
Instead of opening the laptop screen to a full 90 degrees (completely upright) I leave the screen partially closed at or less than 45 degrees and press the start button. I'm renting the laptop too so if I give it to them they will charge me a ridiculous amount of money when I know nothing has been done to it to make it like this. Switch your lappy off, put the USB-stick into the slot at the left side. I'm experiencing the same problem but I can't do the some of the suggestions here because my battery is not removable.
First of all, make sure the computer is turned off, the power adapter is disconnected and the battery is removed. If you are replacing the hard drive with a new one, you’ll have to transfer the mounting bracket to a new drive.